Hi P2V a 2008 R2 server running Citrix 6.5. The P2V went successfully and when its running on the virtual environment i provided it the correct network configuration as below.
1On physical server this OS was running on VLAN 164 and HP blade server.
2. On the virtual environment im using DV switch. Staric ip which was on original box has been assigned to Vm pointing to Vlan 164.
3. i created a DV port and configured it for Vlan 164.
4. On the physical NIC'S on the hosts i could see the IP-Range of the Vlan 164 being presented.
5. I used E1000 as the virtual NIC on the VM and also tried VXnet3 network adapter.
6. This VM connected fine to the network for 2 days and suddently disconnected and wont connect again. Also the Vlan 164 IP range is not presented no longer by the physical Nics on the hosts in the cluster.
7. The physical Box has been shutdown since the P2V took place and never brought up.
8 even when i add vxnet 3 as the additional network that network adapter fails to get any IP from any dhcp.
9 Vm tools have been installed on the VM successfully and i ahve tried rebooting multiple times but it wont connect .
what are my options here to make it connect to the network.